Hello, sorry for my English as a translator, First I am watching all of your videos and I am in love with your place at home. (here in Brazil we have some similar places but due to my conditions I have no ambition to have something similar to what you have). I would like to know which places in london and france your home is, to follow on google maps, something else do you live in london and the house in france is for the weekend ?. It could show more videos of the city near the house of france.

Came here for the Land rover, stayed for the farm/barn restoration. Great content, subscribed :D

You don't have to take the top off. I pulled my tx by myself. [not easy] Found out later the overdrive was bad!

owned a few of the above junk model landy 63 73 . even a 1980 toyota hilux 4x4 is a moon landing compared to the rubbish land rover made till pre 1990..id say even the 1960 nissan patrol was a better car than junk landy .

Hardly a restoration. You mean clutch replacement and roof change.

try this by yourself i am doing two square body chevs 81 shortwheel stepside 77 4x4

I work on these vehicles I never liked them at first but now I’m in love

9.25: New clutch fitted. 13.05: Drives around with with foot resting on clutch pedal. 20k miles later: Wonders why clutch has worn out again.

Basically the same since Landrovers were first built in 1948? The fuel tank under the driver's seat looks like a death-wish. Buy some asbestos underpants?

Nice car brother...visit my jimny too

Nice

Donde se puede pedir esa capota?

Fantástico

wooow

As a kid I've taken heaps of these apart to be shipped back over seas. So easy to work on.

Great job, thanks

Nice job. Excellent project for covid period

Whats the tire size

Daqui do Brasil eu vi q a capota estava virada,as tiras de prender estavam do lado de fora.

Just a quick FYI roll the canvas sides inward and they won hold rain or dirt. When you unroll them it will keep you clean.

great tip thanks

Where you from ?

Iit's not restoring, it's clutch replacement... Anyway thans for some tips, I got one on eye by years but owner prefers to keep him abandoned outside by ten years so far instead of selling...

What seats do you have on yours?

cooles auto, das will ich auch

Sorry to jump in, but I just wanted to share my husband restored a series 2 Landy, check his channel out: https://youtu.be/9Xj-_eqPtGs

13:10. That's why it needed a new clutch then...

Is perfect

Really neat channel. I grew up near Pau, Pyrenees Atlantique. Interesting to see the progress.

I would clean all parts b4 put them back polish paint thepn roof .

pass me a spanner , what size , 13 mil, they are all 13 mil.

You know its a british car when the clutch replacement starts with taking off the roof.

Did you get FINED by Mad Khan in London?

Where you buy a parts. I have one LR series 3 from 1973y. But can find parts.

always one extra cable or bolt that is missed, always....

I spent time in Edinburgh and had one, a 110. Loved it but couldn't import it to Canada. We are only allowed to import 15 years or older. I ended up fulfilling my need for a Landy with my 2008 Jeep Wrangler, which I still have.

Wow, loved the ending. Taking the Old Rover across the channel epic. Thank you, much enjoyed.

Do you have a list of tools?

100 £ clutch, 10,000 £ labour charge 😬

I’m restoring a 1970 Chevy truck. Might not take experience to learn but you do have to have money and time.

Just found this channel and loving the content! Thanks for sharing!

Wow his name is Calvin Klein too. Small world. Lots of sharp edges on the new soft top. They should invest in a shop vac.

Cool I love the LandRover

My dad used to own this car back then... everything look so familiar!,,

respect chaps, good bloody job,

Sweet ride

Thanks for posting and sharing. Nice to see the Land Rover running after your repair work.

Wow wow wow. In love with it!!!

ESTE ES UN 88 -... TENGO 2 88 DE 1953 , Y UNO 109 DE 1980 ... LOS 3 INGLESES ... UNAS JOYAS ...

0:42 What’s up Calvin?

Hello, you can still find original parts for Land Rover, here in the Netherlands you can't find any at all, fake parts have been made, nobody knows where, but they have factory labels, everyone put Land rovers on sale, especially since 2021, taxes on diesel engines increase, and in each year they will increase, the target is, as on December 31, 2029, to be the last day for diesel engines in Europe, Even Toyota has announced that starting with January 2021, they no longer manufacture Toyota with diesel or mixed engines, they switch to electric.

Cool landie

Congratulations from Ukraine) You are the best 😊

Anyone can build a LandRover with just 3 cups of tea and a 13 mil spanner.

https://www.youtube.com/watch?v=9M_A1rDXiSY

Buenísimo. Que motor tiene??

Good job..awaiting restoration videos

"Zero mechanical experience" - this from guys with an engine lift, and plenty of automotive wrenches/tools.

Lack of experience does not mean lack of tools, they could’ve been borrowed from a mate

Yeah, right.

I did a clutch on a landrover, we took engine out?? Much easier? Is it different on the older versions?

I guess the flywheel surface was in good condition and did not need machining?

Bonjour la ferme est située dans quelle région

Nice Land Rover, mate.

nice!

Why do no cleaning the Parts bevor you reasembelt here ? The Gearbox an the Frame gets cleaner with a Steam Powerwasher Kärcher !

This my friends, is why you should never buy someone else's restoration.

According to American Cars that Land Rover Clutch was a breeze. And they are very good vehicles to have. The top was nice to but I would have kept the metal as a Winter one.

Thank you so much for this Video - especially this young Gentlemen for the *Lectures - I looked and learnd - as they did... I recognized hat the assy and parts are not cleaned... and the rail and brackets are still rusted mounted. If you did this not under hurry of time, or why not ?! Wishing You Health and Luck; further a lot of fun with this *Icone, Greetings from Germany...

The best advise: Sell it and buy a Landcruiser :)

DUDE NEVER USE THE FLAT SIDE OF A SPANNER TO LOOSEN A TIGHT NUT OR BOLT USE THE RING ???

Great stuff ..don’t you just love negative comments......keep it up guys ..

Biritish Engineering at it's finest. A lot of faf just to replace a clutch

Destruction 💯... Lmao

A 10mil, and a 13mil spanner, a pair of pliers, a hammer and two screwdrivers - × heads and that's a Landrover tool kit 😁

I have owned and restored 5 Land Rovers. When I say restored, I mean restored. 1958 The actual, official, Olympics vehicle used at the Squaw Valley Winter Olympics 1960 1961 1964 1967 NADA 109 (very rare) 1975

what an arshole channel - really

I’ve been binge watching your channel and loving it. I love building stuff, especially building buildings, so it’s been difficult to look away. I love how you don’t stand in front of the camera and take ten minutes to tell us what you’re about to do and then do it in one. Writing down, briefly, what you’re about to do, either on the screen or on the material you’re using is brilliant. You’re right that we don’t need to be told what you’re about to do, and how, as you’re about to show us. Keep it up.

Riveting content? Yup, torquing good fun.

Oh man, this bring memories back from my service days in Jordan , I finished my two years service in Jan 85, I rode this thing daily for two years. Land-rover is the most uncomfortable vehicle in the history of vehicles. But soldiers are not meant to ride in luxury. The most reliable car in the world no other car come even close. Well-done guys, thank you for this.

Your story seems pretty interesting! I wonder how's your life back in '80s serving Jordan. Thank you for sharing. It will be great if we can see your memorable pictures with the defender too.

Series 3 have a removable cross member. Gearbox goes out the bottom.

以旧翻新，让我获得很多灵感

Meccano for grown ups.

👌👌👌 reminds me in British Darjeeling..but ur land rover seems half serviced already, looking at the paint job ....

You must really like extra work. A sane person would pull the engine or drop de box down (just do a little mod to the crossmember) to do the clutch. Entertaining vid though

I’ve always wanted one...until now! That much trouble to change the clutch? Wow. Guess I better go with a Jeep CJ. But.....

Next time just remove the engine it,s quicker phil https://www.facebook.com/7972991316/posts/10157845268931317/

You are a complete man, you know how to do everything! That's how I want a boyfriend!

okokkokok

Great video, watching while in bed on lockdown Sunday morning. Reminds me of my 340 charger when I was young.

ludicrous design eh.removal of gear box , step one remove roof ! and by the way if you have the complete unit .engine and box it wont go in the trad way through the fire wall aghhhh Great vid tho ta

Love this video

Subscribed when I saw the restoration work coming up in France

الجزائر تونس ترحب بكم

Now LAND ROVER Owned by Indian TATA. But This classic not launched in india. 🤫🤫

I'm afraid you do need experience. And some people are just useless when it comes to anything mechanical. So if you are not that way inclined stick to watching goggle box..

Nice. I might replace my hardtop with a canvas and then it might leak a bit less. Needs a full gearbox refurb/replace first (currently stuck in third gear....).

Is that what you call not experienced?But on the other hand the only thing I could have done well is figure out the canvas right. Lol

Maybe I'm missing something but I thought this was a restoration project. Looks like it was just disassembled for a cleaning and a canvas top replacement.

and I can also drift in GTA 4 on this legendary SUV @OT1c @GC8c @UsxA @0_g4

Fantastic review and story !

I went in with this enthusiastic "no experience" approach and bought a zr1 corvette that needed work. Huge mistake. Nightmare. In London. With no driveway or workshop.

"4:5" oh my gosh thank you I've been really thinking about my life he’s the only one getting me free money *pyptolmon. xyz* අනුගාමිකයන් ඇති කර ගැනීමට හොඳ ක්‍රමයක

Wait Is it me or is a video missing? I might be dreaming but I'm pretty sure you uploaded something where you restored something from gumtree? Am I going crazy Edit: Nevermind I looked on community and I saw a picture of the desk that was restored I really thought I was going crazy