the worst part about the amazon stuff is its not cheap! quality is tho

should check out Bigclives video about the bulbs from Dubai. That could explain the failures.

please give me a multi meter and i will subscribe to your channel

You bandit to rainbow six siege

I've bought some cheap AliExpress led bulbs, that I didn't expect to last more than few months and they work perfectly fine after almost 2 years.😂

I think it's funny that he's famous now to were they're are compliations of him getting electricuted or shocked like this one https://youtu.be/Q20tfoZHy68

🤦‍♀️🤦‍♀️ humans are not light bulbs

Hi I've got a Question: I've build myselve a Capacitor out of Aluminium foil and 3layers of 5m long Book foil. It has a capacity of around 150nF (might get higher when loaded with high voltage due to attraction force) now I will test how much voltage the foil can handle first and then load the capacitor with a voltage lower than that. I expect it to be able to handle something around 15-30KV. I've got a power supply which can output 30KV, and this is kind of save,cause the Energy and current is limited. But now i want to ask you, if the capacitor with around 150nF would be save if loaded to 30KV. So in case i touched it will it just badly hurt or might it harm myselve badly. I've read that ESD over 350mJ is harmfull and this thing would have around 68J if loaded to 30KV. So this would imply that it is very harmful. But if i calculate with 1000Ω of my body and this capacity and voltage with the formula t=R*C*ln(Umax/Utol) with Umax=30KV and Utol=30V (tolerable) I get to a time of 1ms till the voltage is at 30V when i touched it. But i've also seen in a graph, that at a current below 10A through the body it wont kill you as long as it is shorter than 10ms. So now my question is, if it really makes a that big difference if its below 10A or below 30A. (in the case of 30KV and 1KΩ) Or did i calculate something wrong?

@Custmzir I think i wont touch it. But i'd like to know how carefull ive gotta be

I understood everything, but good luck touching them

ARGHHH Stop scaring the shit ot if me man (SOB) EVERY new show makes me jump sometime, Love the Show..Fing Nut job ;¬)

Warranty bro... Warranty. Also E-Mail the manufacturer... Always...

How, in God's green earth is this man still alive??? Now that is a question science can not awnser!

Kiwi Co is amazing and underrated

11:10 it's STEM, not STEAM, stop trying to force art into the hard sciences

Planned obsolescence

Legendas em portugues plisssss

3:52 And They Last 1/10 As Long As Regular Ones

"Let's just plug it straight int-" *prepare for trouble* *make it double*

That girl at 01:16 can't possibly be your daughter, right? She looks normal...

It is infuriating! When LED lights for home application came around I was delighted, only to discover that the concept of planned obsolescence was still in effect. Which makes the whole situation even more infuriating, given the fact that cartell-planned obsolescence in traditional light bulbs was one of the first large-scale industrial scams to be found out...

He is the guy that would be struck by lightning holding a lightning rod and just sit up and say something like: “and that is the power of electric flowing through a conductive material.”

Can you leave 1 word uncensored it will be even funnier

When you first put his finger in the light socket

DUDE, why do you buy such bullshitbulbs?

I gave you a thumb up.

4:31 + 4:37 ohhh.. i remember bigclivedotcom

I am your big fan.my question is which oscilloscope are best

4:15 Hmmmm The 3 Numbers of Power... Rule 34... 69... 420...

Algun canal como este en castellano???

I love the intro

Couldn't they just run them in parallel?

Ur the funniest youtuber I've ever seen 🤣🤣🤣🤣🤣

She 🔥🔥🔥 😛

اهل ایرانی

I just came here to see him shock

1:52 for the last time, put those live wires down

Man do you really keep getting shocked ? Ain’t that bad for the heart 😂🤣

How about a bipolar 1uF cap instead of a resistor? Less heat.. But, you plug it in at a high voltage peak, and SURGE!

120V across to led strip. I'm not even mad, thats amazing.

How to make solor panel

You would think that manufacturers could be held responsible for such false claims like 10,000 hours vs 600 hours. At least in my home country the Department of Consumer Safety has power to issue statements regarding such issues and you can sue a company for violation of warranty if they refuse to replace the products even after a statement from the DCS.

Check out Phillips LEDs made for sale in Dubai only!

8:05 8:09 9:31

10:52 چقدر دخترتون بزرگ شده آقا مهدی. ماشاالله👏

It’s not an electroboom video if something doesn’t explode

CAUSE ITS NOT WATER & MOISTER BUILD UP PROOF...only FULL COATED PLASTIC LED BULBS ARE..THEY ARE SEALED TO SOCKET SCREW..SO PEOPLE SHOULD NOT USED IT AT OUTSIDE OR BATHROOMS

PT4516 Chip Was Manufactured in China ! Then It Is 0.00001 % Chance That It'll Work Fine For Years XD

We tried Kiwico, it's great, especially the Ukulele!

I just subscribed. Is it normal for him to get shocked all the time? Also is there an uncensored version of these videos

چی بگم

LED tubelights are the best , they give soft and white light and are cost effective too.

I don't know how you still alive 🤣

4:15 casually snuck in 34, 69 and 420. Man of culture.

what's 34 69 420/??

خسته نباشی برادر

it's not just LED lights, it's anything made in China. I don't care to get into a political argument, I am going by my age, and purchasing items for decades, made in the USA, Japan, Taiwan, or other countries. I never had this issue until everything started being made in China (including all the components). Items I purchasd use to last for years and years. A washing machine made in China I purchased, lasted 18 Months (I don't even do that much laundry, as I don't have children living at home). I never had a washing machine last less then 15 years in the past, and I have been living in the same house for over 40 years (the manufacturer dispatched a repair man, he tried to blame it on my water quality, or pipe drain setup, which is nonsense, because like I said I live in the same house for over 40 years, and nothing changed). Russia has started manufacturing their own capacitors and other components,so not to fall victim of China's built in design for thing products to break quickly. I am lucky if a computer keyboard lasts a few months now, and headsets and other computer components I purchase now, last about a year.

It's not about where it's made, it's about the quality of components. Blame the big companies. Not the country 😂.

I started buying 800-lumen LED bulbs (60w equivalent) at the dollar store. None have died, and it's been a year and a half.

ain't the led. under the led is circuitry with a timer that shuts off. A reverse engineer proved this to me.. They sell bulbs. If they don't wear out?

Bro I watched this guy when I was 5 it's been six years and I just found his channel again man this brings back memories.

You're 11 and on youtube???

So even the 'high end' LED bulbs only rectify the AC and don't have a capacitor to smooth it out. In other words, the bulb still flashes at 60hz. That would explain why some slow-mo videos look like they were taken at a rave. LEDs have so much potential and can give such a nice even lighting, but instead we get a 60hz strobe light.

best youtuber

wait all LED lamp have warranty? do people claim the warranty?

Funniest thing is that when I buy the cheapest ones from my local store, they don't fail, literally never had any of them fail, and they're all over my house. When I buy Phillips or other brands, they always die very shortly, and get replaced with the cheap ones. I guess the big brands led's are just overengineered and have some failure points the cheap ones don't have. But honestly I'm just lucky with that cheap brand since I've tried other cheap brands and they were terrible.

The present slice potentially nest because footnote prenatally drown vice a hanging prepared. vast, handy secure

Isn't that actually going to make it last longer.....

Mom:Do your homework or no xbox Me: 1:22

Some of my incandecents have lastet for over four years now i believe.

I have some pretty good LED lightbulbs in my room and most of my house, altough i live with my parents so i can't tell them to change all the lightbulbs, my father is an electrician, so most of the lightbulbs in my house are already LED If i made any grammatical or spelling mistakes sorry, i'm italian and english is my second language

KiwiCo have to be the coolest sponsor on the whole internet, those project look so cool.

Maybe the manufacturers meant 10,000 hours of use while moving at 99% the speed light😏 4:14

Ill explain how does warranty for lightbulbs works. You go to the store show them the box with 10y warranty and a broken buld. Then they tell you to f*ck off, so you decide to spare yourself the effort and buy a new ones.

If i remember well lightbulbs were made faulty on purpose so they will break and the company can sell them agin. So maybe its the case with these lights too. TBH manufacturer would have to be insanely incompetent to be unable to make waterproof lights.

You buy cheap shit you get diarrhea. Spend a little bit more and get better quality. Mine have been working for years.

Who remembers Mehdi’s daughter from 4-5 years ago?

Kiwi is a food store in Norway 🇳🇴

In Europe you get osram..

I feel the SAME way! I rage so hard when these LED lights with huge lifetimes fails in 6 months. GGGGRRRRRRRRR!!!!! And I also have some of these outdoor bulbs with water inside. ARGH!

Sir, Please make some tutorial for solving transistor circuit.

the led in my room is sill going more than 3yrs but it lost 50% of its brightness. and I'm not changing it and tell it dies.

The roomy numeric specially fry because slave pathophysiologically pull modulo a callous turkey. acidic, rainy owl

ummmmmmmmmm the last video i watched of yours your daughter was so much younger. who knew that time traveling kids existed

I've been able to get 4 plus years of use from the larger LED lights that claim to be the equivalent of a 60 watt non LED light.

Well my Mirrabella brand LED bulbs have been working for 2 years so far. They are 240 VAC.

very educational. minus the electrocution scenes 😅

سلام ایرانی

Let’s be honest nobody understands anything he says but just watches for the good content

Hey electro boom, what power supply do you use? I wanna get the one

BigMhediDotCom?

Hey Mehdi, I was wondering why I can’t get a continuity reading when testing an operational LED bulb. Can you help me figure this out??? Also, what is your take on these diy oscilloscope kits?

On above of your black shoes

Can you tour is to your small container cabinet on right side of your lulzbot 3d printed.

Haha electro go boom

Imagine getting pinged by ElectroBOOM

Pity - KiwiCo do not ship to Russia

Vertasium did a video on why nice things don't last: because they're designed to fail for economic reasons.

1:53 Loose wires, AVOID THEM.

My Easy Bake Oven doesn't like led bulbs.

Just buy the cheap leds from aliexpress and expect them to lie about the watt ratings... still less than half the price of other places so if it only lasts 12 months who cares. Sometimes you get lucky and have a light that works beyond 2 years. Manufacturers know nobody can be arsed with returning leds for warranty, costs more than its worth to send it back.

4:45 All the reason you need to know why they're cheap and crappy.

Ok so it should still be in glass, if that is good enough to stop water from leaking in.

Led are designed to fail and rhe led companies got pissed off when dubai ordered they need to make multi filament bulbs and run them at lower power so they dont burn themselves out so quick.(he get to that in half of the video)

5:21 i almoust got nightmares due to testing a 12V tiny battery of my bycicle speedometer. So i dont want to touch this with my tounge. (if you test 12 V with your tounge you will literally see flashes in your eyes. Dont know why, probably the electricity is messing with the nerves of your eyes, but THIS *ISNT* A JOKE